SERVO DRIVE REPAIR SERVICES

Servo drive repair service

 

 

 

 Do you need help for your  faulty servo drive ? As soon as you send your equipment  for our servo drive repair services, you'll feel better because NPE will analyse it straight away and let you know what needs to be done and how much it will cost. You can rely on our  quotation because  there won't be a tonne of extra charges put on at the end. After that, you can sit back  knowing that our servo drive repair specialists are taking care of your servo drive by repairing any damaged components and replacing any parts that are at risk of failure.
 

 

What is servo drive? 

 

A servo drive is a basic element of a motion control system which also includes a servo motor, controller, and feedback element. Servo drives take a command signal for position, velocity or current and adjust the voltage and current applied to the servomotor based on closed-loop feedback.

What are the types of servo drive?

 

 

The three types include positional rotation, continuous rotation, and linear. Positional Rotation servos rotate 180 degrees. They also have stops in the gear mechanism to protect the output shaft from over-rotating.

 

7 Red Flags of Servo Drive Failure

 

 

 

Many servo drive component failures are obvious to the human eye, even by a non-technical inspection. Circuit boards are usually the cause of issues. Failing components may remain in operation but produce frequent problems. They will eventually break down entirely, leaving you in the lurch. Here are seven signs that servo drive repairs are likely to be necessary immediately, if not instantly, for your drive to function properly:
 

***Burned spots on the circuit boards***

***Corrosion***

***Leaking or bulging capacitors***

***parts colour change because of to overheating or other causes***

*** expired Component date codes or near to expire***

***Tarnish on leads***

***Cracked resistor***

 

.